|
JB Pool Cue Cases
2x4 Custom Black / Green Cue Case
|
This 2x4 Custom Cue Case is simply Spectacular.
Made from the finest materials, this custom case features
style and protection that will simply blow you away.
This case features hand tooling and black and green stained
leather. There are two pockets, two handles and a
shoulder strap.
Inside
|
Back |
All stress points are reinforced. The case holds up to
31" inch cues..
|
SoldJB Case Philosophy by
John Barton:
My philosophy is
protection first. I started making cases for one simple
reason, protection. Not just any protection either.
Specifically, protection against damage resulting from your cues
coming out of the case when you don't want them to. I had a $1400
Schon Cue that was broken because my open case was knocked off the
table and the cue shot out of it and broke the butt cap as it
clattered on the floor. That case was a $400 tooled leather
beauty. Top of the line at the time. But it didn't do
the one thing I felt it should and that was to protect my cues until
I removed them from it.
What kind of protection am I talking about? Well, as mentioned
above, each case I make does not release the cues until you take
them out. Each case has high density foam rubber to pad
against impact contusions. Each case has layers of insulation
to provide some protection against environmental changes. Each
case is lined with a non-abrasive and non-moisture absorbing
material to protect the finish from scratches and to help keep the
cue dry. No cue parts will be allowed to touch each other at
any point. Your cue will be as protected as the design you
choose allows for. A case's function is first to protect it's
contents and second to provide easy assess to it's contents.
Following that idea I build cases where the form follows the
function. Another way to look at it is a center-out approach.
Using the cues as the center, I put several layers of protection
around them.
Go To outlaw |
