|
Pechauer Black Ice Shaft - JP Series Joint
The Black Ice Shaft
is made from a solid piece of hard rock maple (same as the
rest of our shafts). Because it’s real wood, it has grain
and other markings including mineral and sugar marks. The
Black Ice shaft goes through a dying process that forces
jet black dye into the pores of the wood
going all the way through. As maple is such a hard and dense
wood, the dye finishes a lighter gray color.
In the picture you see some of the grain
turns darker and some spots where the dye can’t penetrate as
well, show as thin white lines. None of these marks are
defects; they are just the character of the wood
coming through!
With our Infused Chemical Engineering (ICE)
Technology, chemicals are infused into the cells of
the wood, changing its structure for added density and a
smooth, glass-like feel for less friction and increased
velocity. This multi-step process is not a barrier, but a
permanent treatment that penetrates the entire shaft.
Average shaft weight of 6.4 oz (approximately 2 ounces more
than a standard shaft) for a weight-forward balance
delivery. This means more power with less effort for
a maximum break (helps make any cue a break cue).
Available for most popular joint types. All shafts use a
1/4" black trim ring.
Pool Cue Specs:
Tip: C4+
Ferrule: 5/8" Juma
Taper: 13mm Break Taper
Joint Pin:
Pechauer JP Series (Flat Faced) Prior to 2025
Trim Ring: 1/4" Black Phenolic
Warranty: Lifetime
Weight Adjustable: Yes
Retail Price - $300.00 |
|
|
